Beta (Inputs.IFC)BetaOptionalmodel: TOptionalstorey: stringOptionalid: stringOptionalname: stringOptionalstart: Bit.Inputs.Base.Point2Optionalend: Bit.Inputs.Base.Point2Optionalheight: numberOptionalthickness: numberOptionallayerSet: stringOptionalalignment: wallAlignmentEnumOptionalbaseOffset: numberOptionalwallType: stringOptionalpredefinedType: wallPredefinedTypeEnumBetamodelThe model to change; it stays as it was, and the call returns the changed model.
BetastoreyThe storey the wall stands on, by GlobalId or by the id it was added with.
Optional BetaidAn id of your own, such as north-wall, by which later calls refer to the wall; the model
turns it into a GlobalId. Left out, one is generated.
Optional BetanameA name for the wall, which other tools show; it need not be unique.
BetastartThe start of the wall's axis, as [x, y] in the storey's plan.
BetaendThe end of the wall's axis, as [x, y] in the storey's plan.
Optional BetaheightThe wall's height, up from its base. Left out, 3 m, in the model's length unit.
Optional BetathicknessThe wall's thickness, used when no layerSet is given; the wall is then one layer without a
material. Left out, 200 mm, in the model's length unit.
Optional BetalayerThe name of the layer set the wall is made of, added before with materials.addLayerSet; its
layers set the thickness.
Optional BetaalignmentWhich side of the axis the wall's layers lie on, looking from start to end. Walls drawn
counterclockwise around a plan with right stand outside the outline.
Optional BetabaseHow far above the storey's floor the wall starts.
Optional BetawallThe wall type the wall is an occurrence of, by GlobalId or by the id it was added with.
Optional BetapredefinedWhat kind of wall it is, for a wall without a wallType; a wall of a type is the kind its
type says.
A straight wall to add for
walls.add: an axis fromstarttoendon a storey, a height, and either athicknessor the layer set it is made of.