Optionalshape: TOptionaldiameter: numberOptionallength: numberOptionaldiametralPitch: numberOptionalpattern: knurlPatternEnumOptionalunit: unitOfLengthEnumOptionalframe: Bit.Inputs.Base.FrameOptionalframeWhere the feature starts on the axis, the axis along the normal and the side it faces along the direction. Left out, the ground, facing +Y.
OptionalunitThe unit the feature is cut in and its lengths and diameter are read in.
OptionaldiameterThe shaft's diameter in unit; the knurl's crests sit on the nearest diameter its teeth track
on.
OptionallengthThe knurl's length along the axis, in unit. A left, right or diamond knurl's grooves twist
through at most 1000 degrees along it.
OptionaldiametralTeeth to an inch of diameter, one of ASME B94.6's: 64, 96, 128 or 160.
OptionalpatternThe grooves' pattern; left and right are B94.6's diagonal knurls.
The shaft to knurl.
A body and an ASME B94.6 knurl to cut into it, for
parts.mechanical.machining.ansi.knurl.