Optionalwidth: numberOptionalheight: numberOptionalwebThickness: numberOptionalflangeThickness: numberOptionalflangeWidth: numberOptionalalignment: basicAlignmentEnumOptionalrotation: numberOptionalcenter: Point3Optionaldirection: Vector3OptionalextrusionLengthFront: numberOptionalextrusionLengthBack: numberThe total width of the profile, in model units.
The total height of the profile, in model units.
The thickness of the web at the back of the channel, in model units.
The thickness of each flange, in model units.
How far each flange reaches inward from the side of the channel, in model units.
Which point of the profile's bounding box sits on center, such as its middle or its top
left corner.
How far the profile is turned in its plane, in degrees.
The point the profile is placed at.
The normal of the plane the profile lies in; the default lays it flat on the ground.
How far the profile grows along its normal, in model units.
How far the profile grows against its normal, in model units.
A U-beam profile and the extrusion lengths for
shapes.solid.createUBeamProfileSolid; at least one length must be above 0.