BetaBetaBetaGives the DIN 471 ring for a shaft or the DIN 472 ring for a bore, with its groove: the ring's thickness, free diameter, lugs and lug holes, and the groove's diameter, width and least distance from the end.
Example: a 20 mm shaft -> a 1.2 thick ring in a groove 19 across and 1.3 wide
Shaft or bore, its diameter and the unit
The ring's and the groove's sizes in unit
BetaLists the shaft or bore diameters DIN 471 or DIN 472 gives a ring for.
Example: shaft -> 3, 4, 5 and on up to 100, in millimetres
Shaft or bore, and the unit
The diameters in unit, smallest first
The sizes of DIN 471 retaining rings for shafts and DIN 472 rings for bores, with their grooves, with no CAD kernel needed, in the unit asked for.
occt.parts.mechanical.retainingRings.dinbuilds the rings as solids.